FAQ
자주 묻는 질문을 키워드, 제품 또는 카테고리별로 검색할 수 있습니다. 자세한 내용은 (800) 242-4685로 문의하거나 질문하기 양식을 제출하십시오.
흡광 리더 |
What are the filters/mirror and reading parameters required to read AlphaScreen and AlphaLISA assays on my Synergy? |
What are the filters/mirror and reading parameters required to read HTRF® assays on my Synergy? |
Which printers are compatible with my ELx800 or ELx808 reader? |
Xenon 플레쉬 램프의 수명은 얼마나 되나요? |
260 nm에서 DNA양 측정을 위해 얼마의 양을 사용해야하나요? |
Do I have to use a blank on the plate when quantitating DNA at 260 nm? |
What advantages does the Bio-Cell™ offer? |
Can I use pathlength correction wavelengths other than 977 nm for aqueous solutions? |
My DNA quantitation results are quite different than that provided by my spectrophotometer. |
What are the commonly used ELISA conjugate/substrate combinations and what wavelengths do they require? |
How can I run cell growth assays on my absorbance microplate reader? |
형광 리더 |
What are the benefits to Top Reading versus Bottom Reading on my fluorescence microplate reader? |
발광 리더 |
How do I configure my Synergy HT / FLx800 for luminescence? |
멀티 모드 리더 |
램프 수명은 얼마나 되며, 어떻게 교환해야 하나요? |
형광 필터: 485/20 nm는 통과 주파수 대역 전체가 20 nm 이라는 뜻인지 아니면 통과 주파수 대역 +/- 20 nm이라는 뜻인가요? |
자외선 범위에서 시료의 흡광도를 읽을 때 어떤 마이크로플레이트를 사용해야 하나요? |
Do the requirements for successful DNA quantitation including pathlength correction, appropriate plates, minimum volumes, and blank wells apply to RNA and protein quantitation at 260 and 280 nm respectively? |
How do I optimize the instrument for reading assays with live cells (cellular assays) on the bottom of the wells? |
How do I adjust the sensitivity for optimum results in fluorescence or luminescence? |
Can I read PCR plates on my FLx800 or Synergy microplate reader? |
Will my ELx808 or PowerWave 340 work with plates that are not 96-wells? |
일반 질문 |
Discontinued BioTek Products |
We have a Synergy HT and wish to know if turning the unit off at night will affect lamp life or not. We'd like to decrease overall utility bills by all means possible. |
How can I connect a BioTek instrument to my laptop that only has USB ports? |
What is the best way to store ELx800 and ELx808 interference filters for extended periods of time? |
How are BioTek readers able to read larger diameter wells? |
What’s the best way to handle assays with temperature control? |
What are the default parameters for BioTek’s microplate readers in Fluorescence mode? |
Does BioTek offer refillable pipette tip formats for environmental and cost-savings purposes? |
What microplate should I use for a particular assay? |
How can I compensate for condensation build-up on the underside of a microplate lid with an assay requiring incubation? |
바이오텍 장비에 관한 문의나 문제점이 있다면 어떻게 해야하나요? |
컴퓨터와 리더기 사이에 통신 문제가 생기면 어떻게 처리해야하나요? |
How does the Universal Test plate analysis determine the pass/fail criteria for accuracy and repeatability? |
How often should I perform performance qualification tests? |
What is the detection limit for DNA quantitation? |
I need an electronic copy of an Operator's manual. Where do I get one? |
What is the MSDS information for BioTek QC test solutions? |
What solutions do you offer to automate hit picking applications? |
How do I get my "universal absorbance test plate" recertified? |
마이크로플레이트 디스펜서 |
I need to dispense 750 µL to a 96-well format deep well microplate. Which of BioTek's microplate dispensers, the MicroFill or the MicroFlo Select, would be the fastest? If it is the MicroFlo Select, would the 5 µL or the 10 µL cassette be best? |
I am currently using a BioTek ELx405 plate washer and am having some clogging issues with the aspiration manifold. Is there a wire tool available to manually clear the aspiration tips? What other methods do you recommend to clean the manifold? |
마이크로플레이트 워셔 |
What is AutoPrime™ and when should I use it? |
BioTek사의 ELx50 워셔는 알카리와 산성 용액 사용이 가능한가요? |
If I want to use a house vacuum, what is the vacuum requirement for the ELx405? |
I may be interested in using my instrument to dispense a corrosive chemical. Are there certain chemicals that should not be used with your instruments? |
When I’m using solutions that contain proteins, how often should I perform a maintenance routine on my microplate washer? |
How do you recommend maintaining my ELx405 Microplate Washer under sterile conditions? |
Why does my liquid handler come on by itself about 10 minutes (or more) after a run is complete? |
Pipetting 시스템 |
How often should I replace the pipette o-rings on my Precision Microplate Pipetting System? |
소프트웨어 |
Where can I find Sample Files for Gen5? |
내 소프트웨어에 대한 비밀 번호를 어떻게 등록을하나요?
|
Gen5 진단 유틸리티는 무엇인가요? 또한 이것은 빛흡수 시험 플레이트를 사용하기 위해 꼭 필요한가요? |
How do I import data into Gen5? |
How do I export data from Gen5 into Excel using PowerExports? |
I’m using Gen5 Software; am I limited to operating one microplate reader at a time? |
Can I install Gen5 on a computer not connected to my plate reader? |
What do I do if I mistakenly register KC4 using the Network license instead of the Full license? |
Do I need to uninstall the previous version of KC4 before I install my new version? |
With KC4 Signature, can I report or export using PowerReports and still maintain compliance to 21 CFR Part 11? |
Incorrect or missing MSJET DLL file error message. |
Can the ELx800/ELx808/µQuant, etc (instruments with keypads) send data to my LIMS system? |
I have Microsoft Windows Vista on my computer. How can I get Vista compatible USB drivers for my system? |
